Is your Keston boiler in need of a repair or service? Has it stopped producing hot water? Do you need it fixed without delay?
We understand how difficult it is to have a boiler that isn’t working properly. That is why we organise our business to be able to respond the same day that you call us (subject to availability), or we can arrange an appointment that is convenient for you.
We have been established since 2002 and with over 16 years experience, we are proud to be known as a Keston Boiler specialist. We diagnose most faults within the first hour of being onsite which is great for you as it means that costs are kept to a minimum.
Keston Boiler Servicing
Keston highly recommends that you carry out an annual boiler service. Why is this so important? Well, not only does it mean that it will run more efficiently and effectively, but most importantly it will mitigate any potentially hazardous situations that an unmaintained boiler may bring. As with all boilers, your Keston boiler will produce harmful by-products such as carbon monoxide if it doesn’t burn properly. With this in mind, we will carry out a full service and make sure that it meets all current regulations which will give you peace of mind that all is safe within your home.
Keston Boiler Repairs
So, your boiler is running under-par at the moment. Is it displaying a fault code? Here are a few which you might be experiencing:
E00 Flame detected when not expected
E01 Ignition failure – the boiler has attempted to light five times and not succeeded
E02 False flame
E03 Boiler overheat
E05 Fan failure
E07 Flue overheat
E08 Flame circuit error
E09 Valve drive error
E10 Control box errors
E11 The automatic test for calibration of flow and return sensors has failed
E12 Control box errors
E18 Flow overheat
E19 Maximum return temperature exceeded
E23 Water filling error
E24 Water pressure lost 4 times in 24 hours
E25 Control box errors
E26 Flame signal lost 5 times in 4 minutes
E28 Fan not rotating
E30 Flow sensor short circuit
E31 Flow sensor open circuit
E32 DHW sensor short circuit
E33 DHW sensor open circuit
E34 Mains supply voltage < 180V
E35 Mains supply frequency incorrect
E37 Water pressure error
E38 Reset key fault
E40 Water pressure too high
E41 Communication error between fascia and control box
E43 Return sensor short circuit
E44 Return sensor open circuit
E45 Flue sensor short circuit
E46 Flue sensor open circuit
E99 As E41
Don’t worry if your fault code isn’t on the above list. We can still fix the problem. It is worth resetting your boiler before you do anything else as this may rectify the problem.
If it doesn’t, please call us and we will be pleased to help. Call us on:
Bristol 0117 9109813 | Bath 01225 220014 | Mobile 07968 246049
or click on our Get In Touch page
We look forward to hearing from you!